New MkIII oil filter adaptor - a finished casting, ready to fit with unions or blank plugs, whichever is ordered - exclusive to Four Ashes.

We 1st made these in 2007 or 08, we have sold perhaps 20 of them over the years

Primarily used for ease of fitting oil coolers to ALL Feltham engines, can also be used for mechanical oil temp as it comes with a drilling for the std DB4/5/6 oil temp adaptor. 

Can be used to replace O/E DB2, 2/4 & Lagonda towers (inc the scraper style filter if bought with a Purolator filter head & bowl)

Based on original Mk111 tower which had the correct size oil drillings as specified by AM for the Mk111 

Prior to that on the VB6 series the drillings were 7/16" - these are far too small, along with the block drilling being too small. This leads to premature oil pump and bearing failure. It not easy to drill out the DB2 & 2/4 2.6 & 3 ltr oil filter towers without wrecking them. our adaptor can be easily adapted for any Feltham application using a variety of ports & unions.

Instructions for connections supplied.

Ordering Info. - must be ordered specifically with model type (chassis no. prefered) & with or without oil cooler, one ordered for use with oil cooler cannot be used on an engine without an oil cooler & vice versa