Rare Lucas screen washer nozzles / jets & the ball sockets, the type that fit between the two stainless plates and are held to the body by 2 screws.

The balls, jets & lower plates (fit against the body) are an accurate reproduction (made in the UK) in stainless steel, the upper locating plates have now been made but the tooling was very expensive, we had used the few original ones we had left but had 2 left to use a patterns.

'I got to see one of your jets today that my friend Jeff bought from you. Absolutely beautiful workmanship! Very accurate jet as they look just like the original set I have.' Larry Hall, USA, Cobra owner, Club Cobra poster, March 2014.

'Thought I’d just say that the jet / nozzle part arrived today and it works perfectly! Phew. Thanks again',  Will Vicary Jensen CV8 owner July 24

When asked what Mike Hannay thought about our service for the stainless cover, gaskets & screw set he bought for his Ex-GPO Morris Minor van he replied 'Just wanted to let you know the parts arrived today, thank you so much for your excellent service, much appreciated' and the parts quality & accuracy themselves 'Perfect thank you' Mike Hannay August 24 

A complete one including the stainless plates is shown in the picture for clarity, with another showing kit of parts except screws.

These were fitted to Aston Martin DB MkIII Saloon's, DHC's & FHC's 1957 to 1959 & a few other 1950's, 60's & 70's cars like the AC Ace, Aceca & Cobra (Thames Ditton leaf sprung type ?), some Morgans, Morris Minor GPO vans towards the end *, Gilberns, Jensen CV8 Mk2 & Mk3 (possibly other models), Daimler Darts, even some Maserati's, originally  available in single jet & twin jet, however we usually stock the single jet as that was fitted to the MkIII but we have a small stock of twin jets available at extra cost, angle of spray 70° approx.

Available as a complete car set, single side set or individual parts - 2 nozzles & 2 ball sockets per car.

The jet / nozzle has the correct serrated (not knurled) edge as the photo.

Our price is £116.39 inc VAT for complete new single kits in stainless steel with single jet nozzle including plates, gaskets & chrome screws or £232.78 inc VAT per car set (2 kits)

Individual prices are:

£24 for the ball,

£24 for the serrated single nozzle, the twin jet is £34 as they have to be spark eroded on a special jig, Daimler Darts & Jensen CV8's use the twin jet nozzle amongst pthers.

£35 for the cup / clamp or shaped plates, as of 18th June 2024 these are back in stock, they are stamped in poilshed stainless

£7.50 for the laser etched flat plate, £4.99 for the rubber gasket

& the 4 stainless screws and a couple of spare are £1.50 or £0.75 for 3 

Making a total of £96.99, this is the price if you live outside of the UK.

Mostly we are able to post as the package is small.

* We are indebted to Mike Hannay for the information about the GPO vans