DB2 to MkIII cam followers, precision turned, hardened & ground lightweight design, compatible with all O/E chilled cast iron cams.

Can also be used with steel cams 'with care' and regular oil changes, made for us by one the UKs leading cam follower manufacturers which used to supply AML.

Suitable for original Cast Iron or new Alperform Alloy cylinder heads.

Available in five types:

STD, thickness of 0.129" / 0.130", available from stock.

Extra Thick, that can be internally ground, supplied at a nominal 0.149" - these can be used to take up incorrect clearances without resorting to removing the head when the original AML system of 'tipping' the valves is used, can be ground down internally to 0.131".  - We can organise this at a small charge if thickness required is specified, available from stock.

Race, short type followers for high lift cams available from stock.

Race, Extra thick, nominal button thickness 0.150" thick, can be internally ground

Race Specials, thickness of button 0.250", used when shims were fitted but need to be removed, can be internally ground