7308 DB2 Front & Rear Bumper Moulding / Side Rubbing strips for 1st 50 3 part grille cars (washboard !!!!)

1.75mtrs per side on the very early DB2s (1st 50), there should be 18 x 1/4 Whitworth studs holding the strip on to the sill, the front pod (under the side of the bonnet) section has 8 x 1/4 Whitworth studs

Front Bumper sections are 0.8mtrs x 2, again held on by 1/4" Whitworth studs through the spring bar inside the bonnet sandwiched between the frame, inner wing & bonnet.

Rear Bumper sections are 1.250 x 2, again held on by 1/4" Whitworth studs through the spring bar inside the boot bolted to the chassis frame 

All measurements are slightly over length

we have offcuts so a 25mm sample can be sent for your perusal